Free Auto-Lock Bottom Box Dieline Template
An auto-lock bottom box, also called a crash-lock bottom, has a pre-glued bottom that drops into place when the flattened carton is squared up, with a tuck closure on top. This generator draws the flat dieline for your inside size: four body panels, a glue flap, a tuck top with dust flaps, and two bottom flaps with 45-degree scores whose glue triangles join the next panel's triangular flap. Download SVG or a 100%-scale PDF.
Want to see a style printed first? Order from 1 piece: browse box styles.
- Cut line
- Fold / crease
- Bleed 3.2 mm
- Safe zone 3.2 mm
- Glue area
Common auto-lock bottom box sizes
Inside sizes in millimetres (inches in brackets) on SBS paperboard 0.018 in (0.46 mm). Each file is drawn at actual size with cut, fold, bleed and safe zone layers.
| Inside size (L × W × H) | Flat size | Download |
|---|---|---|
| 76 × 76 × 152 mm (3 × 3 × 6 in) | 319 × 294 mm | SVG · PDF · Quote this size |
| 76 × 76 × 229 mm (3 × 3 × 9 in) | 319 × 370 mm | SVG · PDF · Quote this size |
| 102 × 76 × 152 mm (4 × 3 × 6 in) | 370 × 294 mm | SVG · PDF · Quote this size |
| 102 × 102 × 203 mm (4 × 4 × 8 in) | 421 × 383 mm | SVG · PDF · Quote this size |
| 127 × 76 × 203 mm (5 × 3 × 8 in) | 421 × 345 mm | SVG · PDF · Quote this size |
| 152 × 102 × 203 mm (6 × 4 × 8 in) | 523 × 383 mm | SVG · PDF · Quote this size |
Auto-lock bottom box
Auto-lock bottoms are used for heavier or bottled products, such as jars, bottles and candles, because the floor is glued at the factory and sets up in one motion. In this template the glue triangles are shaded; the carton is glued flat with its creases on the back|side and front|side folds.
What the template includes
- Cut lines (solid) and fold lines (dashed) on separate layers
- A 0.125 in (3.2 mm) bleed outside the cut and a 0.125 in safe zone inside each main panel
- Panel labels and a legend with every panel size, the flat size and the board
- 1 in and 25 mm scale bars, so you can check a print at 100%
From template to printed box
- Pick the box style. Choose the style and enter the inside length, width and height in inches or millimetres.
- Set the board. Choose SBS paperboard, E-flute corrugated or a custom thickness, and adjust the glue and tuck flaps if you need to.
- Download the template. Download the dieline as SVG or PDF. Both are drawn at actual size.
- Check the scale. Print the PDF at 100% (actual size) and measure the 1 in bar in the legend, then cut and fold a test sample.
- Place your artwork. Open the file in Illustrator, Affinity, Inkscape or Canva, keep the dieline on its own layer, extend backgrounds to the bleed line and keep text inside the safe zone.
- Send it to print. Ask your printer to confirm the final die line for their board, then send the artwork for a proof.
Dieline questions
How does a crash-lock bottom work?
Why does the generator refuse some sizes?
Is an auto-lock bottom stronger than a tuck bottom?
More free dieline templates
- Reverse tuck end box dieline
- Straight tuck end box dieline
- Mailer box dieline
- Pillow box dieline
- Sleeve dieline
- Two-piece box (tray and lid) dieline
- Gable box dieline
- Snap lock bottom box dieline
- Seal end carton dieline
- Pizza box dieline
- Counter display box dieline
- Hexagon box dieline
- Cake box with window dieline
Auto Lock Bottom Boxes, printed with your brand
Each one is made to order and printed with your artwork. Prices are for one listed piece; any other size or quantity is priced in a custom quote.









