Free Pizza Box Dieline Template
A pizza box is a one-piece corrugated roll end box: a square base, rolled side walls and a hinged tuck lid. This generator draws it for your inside size, from 8 x 8 x 1.5 in, as SVG, PDF or DXF; Vorex prints it with no minimum order quantity, free digital design and dieline, and free shipping on every order.
Want to see this style printed first? Order from 1 piece: Pizza Delivery Boxes.
- Cut line
- Fold / crease
- Bleed 3.2 mm
- Safe zone 3.2 mm
- Glue area
Common pizza box sizes
Inside sizes in millimetres (inches in brackets) on E-flute corrugated 1/16 in (1.6 mm). Each file is drawn at actual size with cut, fold, bleed and safe zone layers.
| Inside size (L × W × H) | Flat size | Download |
|---|---|---|
| 203 × 203 × 38 mm (8 × 8 × 1.5 in) | 395 × 524 mm | SVG · PDF · Quote this size |
| 254 × 254 × 51 mm (10 × 10 × 2 in) | 492 × 661 mm | SVG · PDF · Quote this size |
| 305 × 305 × 51 mm (12 × 12 × 2 in) | 588 × 763 mm | SVG · PDF · Quote this size |
| 356 × 356 × 51 mm (14 × 14 × 2 in) | 685 × 865 mm | SVG · PDF · Quote this size |
| 406 × 406 × 51 mm (16 × 16 × 2 in) | 781 × 966 mm | SVG · PDF · Quote this size |
Pizza box
Pizza boxes are made from corrugated board, most often E-flute or B-flute, so they stay stiff with a hot pizza inside and stack in a delivery bag. The roll end construction needs no glue or tape: the side walls fold over twice and lock into the base, and the ears on the front and back walls are held inside them. Common sizes run from 8 in to 16 in square and about 1.5 to 2 in deep.
What the template includes
- Cut lines (solid) and fold lines (dashed) on separate layers
- A 0.125 in (3.2 mm) bleed outside the cut and a 0.125 in safe zone inside each main panel
- Panel labels and a legend with every panel size, the flat size and the board
- 1 in and 25 mm scale bars, so you can check a print at 100%
From template to printed box
- Pick the box style. Choose the style and enter the inside length, width and height in inches or millimetres.
- Set the board. Choose SBS paperboard, E-flute corrugated or a custom thickness, and adjust the glue and tuck flaps if you need to.
- Download the template. Download the dieline as SVG or PDF. Both are drawn at actual size.
- Check the scale. Print the PDF at 100% (actual size) and measure the 1 in bar in the legend, then cut and fold a test sample.
- Place your artwork. Open the file in Illustrator, Affinity, Inkscape or Canva, keep the dieline on its own layer, extend backgrounds to the bleed line and keep text inside the safe zone.
- Send it to print. Ask your printer to confirm the final die line for their board, then send the artwork for a proof.
Dieline questions
What size pizza box do I need?
E-flute or B-flute for pizza boxes?
Can you print the inside of the lid?
Order this box printed
More free dieline templates
- Reverse tuck end box dieline
- Straight tuck end box dieline
- Auto-lock bottom box dieline
- Mailer box dieline
- Pillow box dieline
- Sleeve dieline
- Two-piece box (tray and lid) dieline
- Gable box dieline
- Snap lock bottom box dieline
- Seal end carton dieline
- Counter display box dieline
- Hexagon box dieline
- Cake box with window dieline
Popular custom packaging you can order now
Each one is made to order and printed with your artwork. Prices are for one listed piece; any other size or quantity is priced in a custom quote.









